MagMod Professional Flash Kit

MagMod Professional Flash Kit

MagMod MagBox 24

MagMod MagBox 24"/60cm Pro Kit

MagMod MagBox 24"/60cm Starter Kit

The MagBox 24 Starter Kit from MagMod contains everything you'll
need to maximize the potential of your speedlight. The kit includes the 24" MagBox Octa, a MagRing that will support either one or two speedlights, and a MagShoe that allows you to handhold the setup or mount it to a stand.

HIGHLIGHTS 

  • MagBox 24"/60cm Octa Softbox
  • MagRing - Supports 2 Speedlights
  • MagShoe - for Hand Holding or Stand

Following product will be needed before you can use this item:
was ₹26,000 Special Price ₹22,100
In stock
Only 2 left
SKU
NG-MM-MB-SK
Avail Additional 2% Discount using Bank Transfer payment during Checkout. Simply select Bank Transfer (NEFT/IMPS/RTGS) as your preferred choice of payment on the Payment Page and get an additional 2% discount on the payable amount.

Order before 5pm (on business days) and we will ship it out the same day. Please note that shipping to North Eastern states and Jammu & Kashmir typically takes between 7-14 working days. Shipping of larger products like Dry Cabinets, C-Stands, take longer to reach due to restricted modes of shipping.

Recommended Accessories

  1. MagMod MagBox 24"/60cm Starter Kit
  2. +
  3. MagMod MagGrip
Total price: ₹0
  • This item: MagMod MagBox 24"/60cm Starter Kit ₹22,100

MagBox 24 Octa Softbox (24"/60cm)
Featuring a one-piece design and a magnetic base for very fast set up and breakdown, the 24" MagBox 24 Octa Softbox from MagMod is compatible with Profoto, Bowens, Elinchrom, or Paul C. Buff strobes with optional dedicated adapters and one or two speedlights with the addition of the MagGrip that is sold separately. One of the MagBox's most noticeable features is its evenness of output from edge to edge. Remarkably, this is done without an internal baffle and without exhibiting a hot spot. For personal expression, there are two available gel kits with a variety of colors that slip into the softbox's integrated gel holder, while there's also a CTO set for conversion of your light source to tungsten balance. Finally, sold separately, MagMod's FocusDiffuser functions like a grid and a lens combined, allowing you to control spill and direct the light while increasing its output.

Magnetic Attachment
Magnets inside the base of the MagBox make attachment fast, silent, and super strong. Even if you tilt your softbox at a deep angle or (for some reason) shoot inside a wind tunnel, the MagBox and the MagRing are staying put. Easy Set Up and Tear Down. The MagBox is one solid piece. Pop it open with an easy click. With magnets in the base, you can throw it onto your MagRing in a second. When you're ready to remove the MagBox from the MagRing, simply press the Magnetic Field Disrupter. Then fold up the MagBox; it collapses in one neat, portable piece and can be stored safely in the

MagBox Case.
Speedlight- and Strobe-Compatible. The versatile MagBox can be used with one or two speedlights - any flash that has MagMod's patented MagGrip installed will work. Or use one of the available adapters to mount your Profoto, Bowens, Elinchrom, or Paul C. Buff strobe.Obstruction-Free Design. The calculated design of the MagBox 24 Octa distributes light evenly and without a hotspot, the reason why this softbox is devoid of an internal baffle. It can be used with one or two speedlights. The MagBox provides clean light quality and optimal output.

MagRing
The MagMod MagRing is a lightweight universal speedlight mount that accepts up to two speedlights that have been outfitted with MagMod's MagGrip (MagGrip not included). The MagRing features a cold shoe mounting foot and can mount to a MagMod MagShoe for handheld or stand-mounted use. Magnetic attachments are at the heart of the MagRing and are used to hold MagMod's MagBox softbox. Magnets also secure your speedlights when mounted with the MagGrip, and the MagRing incorporates locking doors for further security. Neodymium magnets inside the MagGrip (not included) allow speedlights to attach securely to the MagRing without tools or locking knobs. With your speedlights magnetically attached to the MagRing, close the rear latching doors for additional security. The MagRing system is incredibly fast as it uses magnets and latches to secure your speedlights. This toolless mounting method makes for rapid setup and breakdown. MagRing works with MagBox accessories.

MagShoe for MagRing
The MagMod MagShoe for MagRing is a lightweight ergonomic holder for your MagRing flash holder. The MagShoe can be mounted to a stand with a 5/8" pin or easily carried handheld, and it accepts either a flash or the MagRing using a cold shoe mounting system. It is designed to operate with only one hand, leaving your other hand available to hold your camera, which allows you to mount your flash or MagRing and lock it in place with a single hand. The single-handed operation extends to the tilt function, which is controlled by a simple trigger that you squeeze to release the lock. This allows you to have a secure grip on the MagShoe while locking or unlocking it with the same hand that is holding it secure. Releasing the trigger engages the tilt lock, which allows the MagShoe to support your MagRing, two flashes, and the MagBox softbox. It integrates an umbrella mounting hole with lock, allowing you to create that familiar soft look. The plastic exterior of the MagShoe is gentle on your hands, and will not accidently trigger your flash via its hot-shoe mounting foot. The built-in locking lever is designed to be locked or unlocked using only one hand. It features an integrated locking ring that locks your flash or MagRing in place without using the locking ring on your flash. When mounted on a stand, you can tilt the MagShoe forward or back over a range of 155° by simply squeezing the trigger and tilting the unit. Releasing the trigger re-engages the tilt lock. this is a single-handed operation that does not require tightening or loosening locking levers or knobs.

Specifications
Name MagMod MagBox 24"/60cm Starter Kit
SKU# NG-MM-MB-SK
MFR# MMBOX24KIT01
Activity Photography, Studio Shoots, Wedding Shoots, Casual Photography, Hobby Photography, Outdoor Portrait Shoots
Weight (kgs) 0.7400
Dimensions 18.0 x 11.0 x 10.5" (Box)
Material Fabric, Fiberglass, Magnets
Brand MagMod
Manufacturer MagnetMod LLC, USA
Warranty 1 Year Manufacturer Warranty
Features
  • MagBox 24 Octa
  • MagBox Fabric Diffuser
  • MagRing
  • MagShoe
In the Box

- 1x MagBox 24 Octa
- 1x MagBox Fabric Diffuser
- 1x MagRing
- 1x MagShoe

Write Your Own Review
You're reviewing:MagMod MagBox 24"/60cm Starter Kit
Your Rating

SHIPPING

  • We currently ship all our items under "Free Shipping".
  • Large sized or heavier orders (like dry cabinets, c-stands, etc) may not be shipped via air, hence might suffer longer transit times.
  • Batteries can not be shipped via air as per legal requirements.
  • On a business day, orders placed before 5pm are shipped out the same day. 
  • No shipping on Sundays and any national holidays.
  • Typically a consignment takes about 1-4 days to major cities, 2-5 days to towns and 10-14 days to North Eastern states.
  • We offer tracking info on all shippings we dispatch so that you can track the status on the fly.  This tracking info is shared to respective customers at the end of the business day.