Konova K3 Camera Slider / 120cm (Open Box)

The 47.2" long Konova K3 Slider supports loads up to 20kg and features roller bearings that provide smooth, stable, and quiet operation. The slider can be supported using a single tripod or a pair of tripods/stands, thanks to the 1/4"-20 threads located on the underside of the track positioned along the center and at either end. Additionally, there are threaded holes at the sides of the slider that enable you to mount it vertically, for expanded creative possibilities. For ground-level shooting, a pair of height and angle-adjustable legs with rubber ball feet are included that screw into the sides of the slider.

The slider carriage features 3/8"-16 threads for attaching a fluid head or ball head, and also 1/4"-20 threaded holes on the underside for accessory mounting. The resistance of the carriage can be quickly set to taste by using a red friction knob, or finely tuned with more finesse using an included wrench for tension adjustment. A metric ruler running the length of the slider makes it easy to perform precise and repeatable camera movements. Should you wish to expand the system in the future, you can choose to add an optional crank handle kit or one of the motion controller options.

Features

• Bubble level
• Carrying bag
• 6mm Steel rails
• 20kg Load capacity
• Friction adjustment knob
• Metric ruler for repeatable movements
• Bearing tension is adjustable using included wrench
• Optional crank handle and motion control upgrade kits
• Mounting threads on side of tripod for vertical mounting
• 1/4"-20 Accessory mounting threads at each end of slider
• Dual oil seals to help keep rails clean from dust and debris
• Four steel bearings provide smooth, stable, and quiet operation
• Detachable height and angle-adjustable legs with rubber ball feet
• 1/4"-20 and 3/8"-16 Mounting threads at center and ends of tripods
• Camera carriage with 3/8"-16 screw and two 1/4"-20 threaded holes