Haida M10 Filter Holder

The Haida M10 Filter Holder is designed to allow for the convenient use of up to three separately available 100mm wide, 2mm thick filters along with a separately available drop-in circular polarizer, neutral density, graduated neutral density, or neutral density polarizer combination filter. For still images or video captures where a drop-in filter is not in use, a drop-in cover is provided to occupy the filter holder's accessory slot for those filters. The cover then serves to prevent stray light, which could have unwanted effects on exposure, from coming in-between the filter holder and the lens behind it.

Pre-installed with two pairs of plastic filter slots, this aluminum-alloy filter holder is initially configured to accommodate two rectangular filters. Use of the filter holder is easily accomplished by first screwing a separately available Haida M10 filter holder adapter ring onto a lens with corresponding front filter threads. After being fitted onto an adapter ring, the filter holder's push-and-release locking lever helps to provide a reliable, yet adjustable connection that allows the holder to be rotated 360°, further benefiting the use of graduated neutral density and other filters that are enhanced by varied positioning. To help prevent stray light from coming in-between an installed filter and a connected lens, two gaskets are included along the front of the M10 Filter Holder. These gaskets are positioned so that, together, they form a seal between the filter holder's slots.